contents table Logo Lexparency.org lexp
Commission Implementing Decision (EU) 2020/480 of 1 April 2020 amending Implementing Decision (EU) 2019/436 on harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council
ANNEX II

ANNEX II

In Annex III to Implementing Decision (EU) 2019/436, the following rows are added:

39.

EN ISO 28927-4:2010

Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010)

2 April 2020C
40.

EN ISO 19353:2016

Safety of machinery – Fire prevention and fire protection (ISO 19353:2015)

2 October 2021B
41.

EN 707:1999+A1:2009

Agricultural machinery – Slurry tankers – Safety

2 October 2021C
42.

EN 792-13:2000+A1:2008

Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools

2 October 2021C
43.

EN 1889-1:2011

Machines for underground mines – Mobile machines working underground – Safety – Part 1: Rubber tyred vehicles

2 October 2021C
44.

EN ISO 3691-5:2014

Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)

EN ISO 3691-5:2014/AC:2014

2 October 2021C
45.

EN ISO 10517:2009

Powered hand-held hedge trimmers – Safety (ISO 10517:2009)

EN ISO 10517:2009/A1:2013

2 October 2021C
46.

EN 12012-1:2007+A1:2008

Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators

2 October 2021C
47.

EN 12012-3:2001+A1:2008

Plastics and rubber machines – Size reduction machines – Part 3: Safety requirements for shredders

2 October 2021C
48.

EN 12312-8:2005+A1:2009

Aircraft ground support equipment – Specific requirements – Part 8: Maintenance stairs and platforms

2 October 2021C
49.

EN 12733:2001+A1:2009

Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety

2 October 2021C
50.

EN 12981:2005+A1:2009

Coating plants – Spray booths for application of organic powder coating material – Safety requirements

2 October 2021C
51.

EN 13355:2004+A1:2009

Coating plants – Combined booths – Safety requirements

2 October 2021C
52.

EN 14018:2005+A1:2009

Agricultural and forestry machinery – Seed drills – Safety

2 October 2021C
53.

EN 60204-1:2006

Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2005, Modified)

EN 60204-1:2006/AC:2010

EN 60204-1:2006/A1:2009

2 October 2021B
54.

EN 60204-11:2000

Safety of machinery – Electrical equipment of machines – Part 11: Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV (IEC 60204-11:2000)

EN 60204-11:2000/AC:2010

2 October 2021B
55.

EN 848-3:2012

Safety of woodworking machines – One side moulding machines with rotating tool – Part 3: Numerically controlled (NC) boring and routing machines

2 October 2021C
56.

EN ISO 28927-2:2009

Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)

2 October 2021C
57.

EN 60745-2-21:2009

Hand-held motor-operated electric tools – Safety – Part 2-21: Particular requirements for drain cleaners (IEC 60745-2-21:2002, Modified)

EN 60745-2-21:2009/A1:2010

2 October 2021C
58.

EN 859:2007+A2:2012

Safety of woodworking machines – Hand fed surface planing machines

2 October 2021C
59.

EN 860:2007+A2:2012

Safety of woodworking machines – One side thickness planing machines

2 October 2021C
60.

EN 861:2007+A2:2012

Safety of woodworking machines – Surface planing and thicknessing machines

2 October 2021C
61.

EN 1114-3:2001+A1:2008

Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs

2 October 2021C
62.

EN 1127-1:2011

Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology

2 October 2021B
63.

EN 1459-2:2015

Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks

2 October 2021C