contents table Lexparency.org
European Market Infrastructure Regulation (EMIR)
Article 42

Article 42 — Default fund

  1. To limit its credit exposures to its clearing members further, a CCP shall maintain a pre-funded default fund to cover losses that exceed the losses to be covered by margin requirements laid down in Article 41, arising from the default, including the opening of an insolvency procedure, of one or more clearing members.

    The CCP shall establish a minimum amount below which the size of the default fund is not to fall under any circumstances.

  2. A CCP shall establish the minimum size of contributions to the default fund and the criteria to calculate the contributions of the single clearing members. The contributions shall be proportional to the exposures of each clearing member.
  3. The default fund shall at least enable the CCP to withstand, under extreme but plausible market conditions, the default of the clearing member to which it has the largest exposures or of the second and third largest clearing members, if the sum of their exposures is larger. A CCP shall develop scenarios of extreme but plausible market conditions. The scenarios shall include the most volatile periods that have been experienced by the markets for which the CCP provides its services and a range of potential future scenarios. They shall take into account sudden sales of financial resources and rapid reductions in market liquidity.
  4. A CCP may establish more than one default fund for the different classes of instrument that it clears.
  5. In order to ensure consistent application of this Article, ESMA shall, in close cooperation with the ESCB and after consulting EBA, develop draft regulatory technical standards specifying the framework for defining extreme but plausible market conditions referred to in paragraph 3, that should be used when defining the size of the default fund and the other financial resources referred to in Article 43.

    ESMA shall submit those draft regulatory technical standards to the Commission by 30 September 2012.

    Power is delegated to the Commission to adopt the regulatory technical standards referred to in the first subparagraph in accordance with Articles 10 to 14 of Regulation (EU) No 1095/2010.